MTP-16 APC to 8 x LC UPC Harness, 16 Fibers, OM4, Crossover
A factory terminated MTP®-16 Female with Offset Key harness: 16 Fibers, OM4 50/125μm, Plenum (OFNP). It is the cleanest way to connect a parallel optics port to several duplex ports on switches, servers or patch panels.
Standard lengths are 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) and 40m (131ft). Because we are the manufacturer, any other length between or beyond these steps can be produced on request, with your choice of jacket color, labeling and packaging.
Product Highlights
- MTP®-16 Female (Non-Pinned) with Offset Key to LC Duplex, 16 Fibers
- OM4 50/125μm, bend insensitive fiber
- Insertion loss ≤0.35dB (0.15dB Typ.), return loss ≥45dB
- Crossover polarity
- 3.0mm Plenum (OFNP) round cable
- Minimum bend radius 7.5mm
- Ten standard lengths from 1m (3ft) to 40m (131ft), custom lengths built to order
Specifications
| Part Number | 16FMTPLCOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP®-16 Female (Non-Pinned) with Offset Key |
| Connector B | LC Duplex |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Polish Type | APC to UPC |
| Polarity | Crossover |
| Cable Jacket | Plenum (OFNP) |
| Fiber Count | 16 Fibers |
| Glass Fiber | Bend Insensitive Fiber |
| Minimum Bend Radius | 7.5mm |
| Breakout Outside Diameter (OD) | 2.0mm |
| Cable Outside Diameter (OD) | 3.0mm |
| Breakout Length | 0.5m |
| Tensile Strength | 80/240N (Long/Short Term) |
| MTP Connector IL | ≤0.35dB (0.15dB Typ.) |
| MTP Connector RL | ≥45dB |
| LC Connector IL | ≤0.2dB |
| LC Connector RL | ≥30dB |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
Applications
Install this harness between an MPO trunk or panel and LC based transceivers. The 16-fiber interface matches 400G SR8 optics, where all 16 fibers carry active transmit and receive lanes. The labeled duplex legs make it easy to land each pair on the correct port.
LC Legs and Port Mapping
Every LC duplex leg is factory polished and tested individually, with return loss well above the multimode or single mode requirement. The fan-out is compact and strain relieved, and the leg numbering matches the polarity table for error-free patching.
Ordering Information
To order, quote 16FMTPLCOM4 together with the length and quantity you need. The 1m (3ft) version is the standard model; Private labeling, custom packaging and project specific documentation are all handled in-house.
Quality and Testing
Every MPO/MTP assembly leaving our factory is 100% tested for insertion loss and return loss, with end face geometry checks on the multi-fiber ferrules. Controlled polishing keeps the loss budget stable across the whole batch, which matters when several mated pairs sit in one link.
How We Pack
Each assembly is coiled, capped and sealed in an individual bag, then packed into foam lined export cartons. Test reports can be attached per unit or per batch, and carton marks follow your shipping instructions.
Logistics
Most orders leave our facility within a few working days. Courier, air freight and sea freight are all available, and we are happy to hand goods to your nominated forwarder in China.
