Arista Networks 400GBASE-ZRP Compatible 400G QSFP-DD ZRP Transceiver Module ＞600km 1528.77~1567.13nm
The 400GBASE-ZRP compatible module serves equipment requiring a 400G QSFP-DD interface with 1528.77~1567.13nm optics and a ＞600km rating. Connection is through Duplex LC/UPC. Product data, application guidance and factory verification are presented together to support project teams keep OEM references, delivery records and port schedules aligned.
OEM Part Number: 400GBASE-ZRPHT Part Number: QDD-ZRPH-400G
Product Highlights
- Compatible alternative to Arista Networks 400GBASE-ZRP
- 400G connectivity at 100/200/300/400 Gbps
- Optical wavelength: 1528.77~1567.13nm
- Specified reach: ＞600km
- Duplex LC/UPC / SMF interface
- Digital diagnostic monitoring: Supported
- Operating temperature: 0℃ to 70°C(32 to 158°F)
Specifications
| Arista Compatible | 400GBASE-ZRP |
|---|---|
| Manufacturer | HT |
| HT Part Number | QDD-ZRPH-400G |
| Form Factor | QSFP-DD |
| Max. Data Rate | 100/200/300/400 Gbps |
| Wavelength | 1528.77~1567.13nm |
| Max. Cable Distance | ＞600km |
| Connector | Duplex LC/UPC |
| Media | SMF |
| TX Power | -6~1dBm |
| RX Power | Amplified: Full Rx OSNR Tolerance: -12~0dBm Extended Range: ZRx00-OFEC: -18~3dBm 400ZR: -15~3dBm Unamplified: 400ZR: -20~0dBm ZR400-OFEC-16QAM: -23~0dBm ZR300-OFEC-8QAM: -26~0dBm ZR200-OFEC-QPSK: -30~0dBm ZR100-OFEC-QPSK: -32~0dBm |
| Max. Power Consumption | 22.5W |
| Minimum Receiver Power | Amplified: ≤-12dBm Unamplified: 400G ZR: ≤-20dBm 400G ZR+: ≤-23dBm |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0℃ to 70°C(32 to 158°F) |
| Inbuilt FEC | OFEC, CFEC |
| Modulation Format | 100G DP-QPSK/ 200G DP-QPSK / 300G DP-8QAM / 400G DP-16QAM |
| CD Tolerance | 400ZR: -2.4~2.4ns/nm ZR400-OFEC-16QAM: 12.0ns/nm ZR300-OFEC-8QAM: 18.0ns/nm ZR200-OFEC-QPSK: 24.0ns/nm ZR100-OFEC-QPSK: 48.0ns/nm |
| OSNR Tolerance | 400G ZR: 26dB/0.1nm 400G ZR+: 23.5dB/0.1nm 300G ZR+: 20dB/0.1nm 200G ZR+: 15dB/0.1nm 100G ZR+: 12dB/0.1nm |
| Protocols | Open ZR+ MSA 2.0 and OIF-400ZR-02.0,OIF-CMIS-05.2,OIF-C-CMIS-01.2,QSFP-DD-Hardware-Rev6.3 IEEE Std 802.3-2018 |
| Application | LH/Regional/Metro/ROADMs |
Project Documentation and Traceability
Large deployments are easier to audit when the order code, optical standard and endpoint record agree. Keep the OEM reference in the compatibility document and the HT part number on the packing list. Labels and carton groups can be arranged by rack or port plan so installers need not identify modules by appearance. For this model, the principal parameters are data rate 100/200/300/400 Gbps, wavelength 1528.77~1567.13nm, rated reach ＞600km.
Arista Networks Compatibility and Factory Testing
Factory verification starts with the expected 400GBASE-ZRP identity and finishes with an operating host link. EEPROM data, diagnostic visibility and the stated optical parameters are assessed together. Equipment model, hardware revision and software release can be reviewed before dispatch where platform behavior is uncertain.
Applications and Optical Link Design
This coherent interface is suited to data-center interconnect, metro transport and managed DWDM links where the host platform supports the stated modulation and FEC modes. Design the optical line around the actual launch power, receiver range, OSNR requirement and span loss; the stated reach is not a substitute for a link-budget calculation. Use matching coherent modules and the appropriate DWDM channel plan at both ends.
Before deployment, check the host port type, supported data rate and firmware requirements. The 400G interface configuration must match the remote equipment; sharing a QSFP-DD housing alone does not make two transceiver types interoperable.
For this coherent interface, document the wavelength plan and modulation or FEC settings before commissioning. Measure span loss and verify adequate OSNR. Interoperability depends on compatible coherent modes as well as form factor, so another coherent part number must not be substituted without engineering review.
Optical Acceptance, Diagnostics and Handling
For this model, the specified transmit-power range is -6~1dBm. Digital diagnostics make later maintenance easier when baseline values are captured at installation. Save the initial readings with the port and OEM reference, then investigate meaningful changes rather than reacting to a single transient value. Diagnostic support depends on the host as well as the module, so unavailable fields should be confirmed with the platform documentation. Diagnostic monitoring is listed as Supported. Before every insertion, keep dust caps in place until the patch lead is ready, avoid touching the optical end face and use an appropriate inspection and cleaning procedure. Do not look into an active optical interface.
Frequently Asked Questions
Is this an original Arista Networks transceiver?
No. It is an HT-manufactured compatible alternative for equipment that specifies 400GBASE-ZRP, not an original Arista Networks-branded module.
Which fiber and connector are required?
Use Duplex LC/UPC with SMF. The specified maximum reach is ＞600km, subject to fiber quality and total link loss.
Can it be mixed with another wavelength or reach version?
Only when the two ends share the same optical standard, wavelength plan and supported data rate. Check the exact part numbers and link budget rather than relying only on the module form factor.
Ordering Information
Use 400GBASE-ZRP as the compatibility cross-reference and QDD-ZRPH-400G as the HT ordering identity. Keep other reaches or wavelength directions on separate order lines. Neutral labels, customer packaging and project-specific compatibility review are available on request.
Shipping and Lead Time
Standard configurations normally ship within one to three working days, with production lead times confirmed for larger quantities. International courier, air freight and sea freight are available; customer courier accounts and nominated forwarders are accepted.
Quality Assurance and Packaging
Quality control covers the optical or electrical interface, host identification and operating link. The verified unit is then individually protected and cartoned. Customer references, rack groups and project packing lists can be added for volume orders.
