Cisco CWDM-SFP10G-1470-I Compatible 10G SFP+ Transceiver Module
This Cisco CWDM-SFP10G-1470-I compatible transceiver provides 10G connectivity in a hot-swappable SFP+ package. Its optical design operates at 1470nm for up to 80km, using Duplex LC. Complete parameters and related OEM references help project teams keep OEM references, delivery records and port schedules aligned.
OEM Part Number: CWDM-SFP10G-1470-IHT Part Number: CW-SFP10G80-47-I
Product Highlights
- Compatible alternative to Cisco CWDM-SFP10G-1470-I
- 10G connectivity at 11.3Gbps
- Optical wavelength: 1470nm
- Specified reach: 80km
- Duplex LC / SMF interface
- Operating temperature: -40 to 85°C (-40 to 185°F)
- Factory compatibility verification and optical performance testing before shipment
Specifications
| Cisco Compatible | CWDM-SFP10G-1470-I |
|---|---|
| Manufacturer | HT |
| HT Part Number | CW-SFP10G80-47-I |
| Form Factor | SFP+ |
| Max Data Rate | 11.3Gbps |
| Wavelength | 1470nm |
| Max Cable Distance | 80km |
| Connector | Duplex LC |
| Media | SMF |
| Power Consumption | 1.8W |
| Packaging Technology | BOX |
| Optical Components | EML CWDM |
| DOM Support | Yes |
| TX Power | 0~5dBm |
| RX Power | -23~-7dBm |
| Industrial Temperature Range | -40 to 85°C (-40 to 185°F) |
| Receiver Sensitivity | < -23dBm |
| Modulation | NRZ |
| Extinction Ratio | >6dB |
| Protocols | SFP+ MSA, SFF-8431, SFF-8472, IEEE 802.3ae, ITU-T G.652 |
Project Documentation and Traceability
Large deployments are easier to audit when the order code, optical standard and endpoint record agree. Keep the OEM reference in the compatibility document and the HT part number on the packing list. Labels and carton groups can be arranged by rack or port plan so installers need not identify modules by appearance. For this model, the principal parameters are data rate 11.3Gbps, wavelength 1470nm, rated reach 80km.
Cisco Compatibility and Factory Testing
Compatibility testing for CWDM-SFP10G-1470-I combines identification with a live link and available transmit, receive and alarm information. Connector condition is inspected separately. Equipment model, hardware revision and software release can be reviewed before dispatch where platform behavior is uncertain.
Applications and Optical Link Design
Use this module for equipment interconnection over the specified single-mode fiber plant, including enterprise backbone, campus, metro or data-center interconnect links according to its rated distance. Confirm that both ends use the same optical standard and wavelength plan, and allow for connector, splice and patch-panel loss within the stated power budget.
The industrial temperature rating makes this version appropriate for controlled outdoor cabinets, transport nodes and other installations exposed to wider ambient temperature variation. Adequate airflow, protected cable routing and host-platform temperature limits still apply.
For this 1470nm interface, verify channel spacing and filter compatibility. Passive filters add loss even without active equipment, so assess 80km using the complete channel rather than fiber distance alone.
Optical Acceptance, Diagnostics and Handling
For this model, the specified transmit-power range is 0~5dBm; receiver sensitivity is < -23dBm. A sound acceptance record includes link state, diagnostic temperature, supply voltage and transmit or receive levels where the host exposes them. Compare the readings with the stated ranges rather than treating any received light as proof of adequate margin. Persistent alarms or borderline values should trigger an end-face and complete-channel inspection. Before every insertion, keep dust caps in place until the patch lead is ready, avoid touching the optical end face and use an appropriate inspection and cleaning procedure. Do not look into an active optical interface.
Frequently Asked Questions
Is this an original Cisco transceiver?
No. It is an HT-manufactured compatible alternative for equipment that specifies CWDM-SFP10G-1470-I, not an original Cisco-branded module.
Which fiber and connector are required?
Use Duplex LC with SMF. The specified maximum reach is 80km, subject to fiber quality and total link loss.
Can it be mixed with another wavelength or reach version?
Only when the two ends share the same optical standard, wavelength plan and supported data rate. Check the exact part numbers and link budget rather than relying only on the module form factor.
Ordering Information
When ordering, specify CWDM-SFP10G-1470-I, CW-SFP10G80-47-I, quantity and intended host platform. Project labels can repeat these details for receiving and asset records. Neutral labels, customer packaging and project-specific compatibility review are available on request.
Shipping and Lead Time
Standard configurations normally ship within one to three working days, with production lead times confirmed for larger quantities. International courier, air freight and sea freight are available; customer courier accounts and nominated forwarders are accepted.
Quality Assurance and Packaging
Quality control covers the optical or electrical interface, host identification and operating link. The verified unit is then individually protected and cartoned. Customer references, rack groups and project packing lists can be added for volume orders.
