LC UPC to LC UPC Simplex OM1, 0.9mm Fiber Patch Cable
For Pakistani procurement and engineering teams, the specification provides a practical basis for checking compatibility before production is requested. This OM1 fiber patch cable carries a LC UPC interface on one end and a LC UPC interface on the other, factory terminated on OM1 glass and optically tested as an entire unit. The single-fiber build suits bidirectional optics, monitoring taps and any connection that carries traffic over one strand.
Product Highlights
- Precision Zirconia Ferrule Connectors Ensure Low Loss
- Color-Coded Cable Jacket for Easy Identification
- Ideal for Unidirectional Data Transmission
- Pre-Terminated Cable Allows for Implementing Plug & Play Solutions
- Exceptional Performance in Data Centers, Telecommunication Networks, and Enterprise Settings
Specifications
| Connector A | LC UPC Simplex |
|---|---|
| Connector B | LC UPC Simplex |
| Fiber Count | 1 Fiber |
| Fiber Grade | G.651 |
| Fiber Mode | OM1 62.5/125μm |
| Wavelength | 850/1300nm |
| Cable Outside Diameter (OD) | 0.9mm |
| Tensile Strength | Compliant |
| Cable Type | Tight-Buffered |
| Min. Bend Radius (Optical Fiber) | 15mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Connector Durability | 1000 times |
| Tensile Strength | 3/6N (Long/Short Term) |
| Insertion Loss | ≤0.3dB |
| Return Loss | ≥30dB |
| Attenuation at 850nm | ≤3.5dB/km |
| Attenuation at 1300nm | ≤1.5dB/km |
| Operating Temperature | -10 to 70°C (14 to 158℉) |
| Storage Temperature | -20 to 70°C (-4 to 158℉) |
| Connector A | LC UPC Simplex |
Legacy multimode for installed systems
OM1 and OM2 cabling remains in service in industrial controls, building automation and older campus networks. The product assembly matches that plant: the 62.5/125 or 50/125 core mates correctly with the present infrastructure, avoiding the modal mismatch that mixing core sizes would create.
Matching the installed base
When a legacy connection fails, the suitable repair is a cord that matches the current fiber grade. Because patching OM1 with OM3 introduces a core-size transition that adds unpredictable loss, keeping a small stock of the right legacy jumpers is cheaper than fault finding a mismatched one.
Length Options
The product assembly is built to the ordered length; state the measured path with the request and the factory will make certain of the manufacturable specification with the quotation.
Quality Control and Testing
Every manufactured assembly is terminated with precision zirconia ferrule connectors and optically tested before packing: insertion loss and return loss are verified on every cable, and end-face geometry is inspected for consistent physical contact. The installed cable ships with dust caps on the two connectors and the test result offered on specify.
Ordering and Factory Support
Refer to this setup by connector pair, fiber mode and length when specifying a quotation. For configurations outside the listed options, mixed connector families, jackets, identification or project packing, send the specification with the request and the factory will make certain of the build before factory assembly. For Pakistan, a clear port or maintenance schedule helps us confirm the correct factory-built configuration before supply.
