NVIDIA/Mellanox MMA4Z00-NS400 Compatible 400G Single-port OSFP RHS/Flat Top SR4 Transceiver Module
This NVIDIA/Mellanox MMA4Z00-NS400 compatible transceiver provides 400G connectivity in a hot-swappable Single-port OSFP RHS/Flat Top package. Its optical design operates at 850nm for up to 30m on OM3 / 50m on OM4 or OM5, using MPO-12/APC. Complete parameters and related OEM references help project teams keep OEM references, delivery records and port schedules aligned.
OEM Part Number: MMA4Z00-NS400HT Part Number: OSFP-SR4-400G-FL
Product Highlights
- Compatible alternative to NVIDIA/Mellanox MMA4Z00-NS400
- 400G connectivity at 425Gbps (4x106.25Gbps)
- Optical wavelength: 850nm
- Specified reach: 30m on OM3 / 50m on OM4 or OM5
- MPO-12/APC / MMF interface
- Digital diagnostic monitoring: Supported
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| NVIDIA/Mellanox InfiniBand Compatible | MMA4Z00-NS400 |
|---|---|
| Manufacturer | HT |
| HT Part Number | OSFP-SR4-400G-FL |
| Form Factor | Single-port OSFP RHS/Flat Top |
| Max. Data Rate | 425Gbps (4x106.25Gbps) |
| Wavelength | 850nm |
| Max. Cable Distance | 30m@OM3/50m@OM4 or OM5 |
| Connector | MPO-12/APC |
| Media | MMF |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| TX Power | -4.6~4dBm |
| Minimum Receiver Power | -6.3dBm |
| Power Budget | 1.7dB |
| Receiver Overload | 4.0dBm |
| Max. Power Consumption | 8.5W |
| Extinction Ratio | 2.5dB |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation (Electrical) | 4x100G-PAM4 |
| Modulation (Optical) | 4x100G-PAM4 |
| CDR (Clock and Data Recovery) | TX and RX Built-in CDR |
| Inbuilt FEC | Yes |
| Core Size | 50/125µm |
| Packaging Technology | COB |
| MTBF | 7210148 Hours (@40°C, 60% CL)3580900 Hours (@40°C, 90% CL)5016607 Hours (@50°C, 60% CL)2384800 Hours (@50°C, 90% CL)2323762 Hours (@70°C, 60% CL)1042265 Hours (@70°C, 90% CL) |
| Application | 400G InfiniBand |
| Protocols | 400G InfiniBand NDR, OSFP MSA Rev 5.0、IEEE 802.3ck、IEEE 802.3-2022 |
Project Documentation and Traceability
Large deployments are easier to audit when the order code, optical standard and endpoint record agree. Keep the OEM reference in the compatibility document and the HT part number on the packing list. Labels and carton groups can be arranged by rack or port plan so installers need not identify modules by appearance. For this model, the principal parameters are data rate 425Gbps (4x106.25Gbps), wavelength 850nm, rated reach 30m on OM3 / 50m on OM4 or OM5.
NVIDIA/Mellanox Compatibility and Factory Testing
The module is checked for host recognition as MMA4Z00-NS400, link establishment and diagnostic reporting. Physical cage fit alone is not treated as evidence of compatibility. Equipment model, hardware revision and software release can be reviewed before dispatch where platform behavior is uncertain.
Applications and Optical Link Design
Typical deployments include switch-to-switch, switch-to-server and aggregation links inside a data hall or between adjacent equipment rooms. The MPO-12/APC interface connects to the specified multimode cabling, and the stated reach depends on fiber grade and link loss. Keep this interface on the matching multimode optical standard rather than connecting it directly to a single-mode wavelength or reach variant.
Before deployment, check the host port type, supported data rate and firmware requirements. The 400G interface configuration must match the remote equipment; sharing a Single-port OSFP RHS/Flat Top housing alone does not make two transceiver types interoperable.
For this multimode module, confirm fiber grade, modal bandwidth and total loss before commissioning. The 30m on OM3 / 50m on OM4 or OM5 figure applies only under suitable cabling conditions. Inspect every MPO-12/APC mating point and match the remote optical standard.
Optical Acceptance, Diagnostics and Handling
For this model, the specified transmit-power range is -4.6~4dBm; the stated optical power budget is 1.7dB. Digital diagnostics make later maintenance easier when baseline values are captured at installation. Save the initial readings with the port and OEM reference, then investigate meaningful changes rather than reacting to a single transient value. Diagnostic support depends on the host as well as the module, so unavailable fields should be confirmed with the platform documentation. Diagnostic monitoring is listed as Supported. Before every insertion, keep dust caps in place until the patch lead is ready, avoid touching the optical end face and use an appropriate inspection and cleaning procedure. Do not look into an active optical interface.
Frequently Asked Questions
Is this an original NVIDIA/Mellanox transceiver?
No. It is an HT-manufactured compatible alternative for equipment that specifies MMA4Z00-NS400, not an original NVIDIA/Mellanox-branded module.
Which fiber and connector are required?
Use MPO-12/APC with MMF. The specified maximum reach is 30m on OM3 / 50m on OM4 or OM5, subject to fiber quality and total link loss.
Can it be mixed with another wavelength or reach version?
Only when the two ends share the same optical standard, wavelength plan and supported data rate. Check the exact part numbers and link budget rather than relying only on the module form factor.
Ordering Information
When ordering, specify MMA4Z00-NS400, OSFP-SR4-400G-FL, quantity and intended host platform. Project labels can repeat these details for receiving and asset records. Neutral labels, customer packaging and project-specific compatibility review are available on request.
Shipping and Lead Time
Standard configurations normally ship within one to three working days, with production lead times confirmed for larger quantities. International courier, air freight and sea freight are available; customer courier accounts and nominated forwarders are accepted.
Quality Assurance and Packaging
Before packing, the module receives interface inspection, identification and link checks. Protective packaging avoids pressure on the connector and latch. Customer references, rack groups and project packing lists can be added for volume orders.
