400G OSFP IHS/Finned Top to 2 x 200G QSFP56 Active Optical Breakout AOC
The 400G OSFP IHS/Finned Top to 2 x 200G QSFP56 Active Optical Breakout AOC connects OSFP to 2x QSFP56 ports at 400Gbps over Breakout AOC fiber at 850nm. Because the optics are built into the cable ends, installation is plug and play with no separate transceivers to manage, and airflow inside the rack stays unobstructed. It is well suited to 400G Ethernet data center and cloud network environments. Cable length: Customized.
Product Highlights
- OSFP to 2x QSFP56
- Data rate: 400Gbps
- Cable type: Breakout AOC
- Length: Customized
- Wavelength: 850nm
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-400G-2QAOxx |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP to 2x QSFP56 |
| Max. Data Rate | 400Gbps |
| Cable Length | Customized |
| Cable Type | Breakout AOC |
| Wavelength | 850nm |
| Minimum Bend Radius | 30mm |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| Max. Power Consumption | 10W (OSFP End) 5.5W (QSFP56 Per End) |
| Jacket Material | OFNP |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation Format | OSFP-8x 50G-PAM4 QSFP56-4x 50G-PAM4 |
| Host FEC | Pre-FEC BER 2.4E-4, Post-FEC BER 1E-12 |
| Application | 400G/200G Ethernet |
| Protocols | IEEE 802.3cd, CMIS Rev. 4.0, SFF-8679, SFF-8661, SFF-8636 |
Applications
The 400G OSFP IHS/Finned Top to 2 x 200G QSFP56 Active Optical Breakout AOC is a 400Gbps active optical cable for OSFP to 2x QSFP56 connections in 400G Ethernet data center and cloud network environments. Ordered in customized lengths, it matches the actual rack geometry without slack. The breakout design lets one high speed port feed 2x QSFP56, which raises port utilization and simplifies cabling in dense rows. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request. The link runs OSFP-8x 50G-PAM4 QSFP56-4x 50G-PAM4 modulation, which keeps it aligned with current 400G switch silicon.
Standards and Compatibility
This product is designed and tested to comply with IEEE 802.3cd, CMIS Rev. 4.0, SFF-8679, SFF-8661, SFF-8636. It plugs into any standards-based OSFP to 2x QSFP56 port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
This cable is built to order in customized lengths. Our part number OSFP-400G-2QAOxx identifies the configuration. When placing an order, tell us the length you need and any label or packaging requirements. Samples for testing can be arranged before bulk orders.
How We Ship
Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.
Quality and Testing
Every unit we ship is tested in our own test bed on mainstream switch and transport platforms before packing. Our test center has been fully upgraded, which sets us apart from other third party product providers: 10G, 40G, 100G, 200G and 400G transceivers and direct attach cables are verified on the latest top brand equipment, including selected original switches that can hardly be found elsewhere.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
