800G OSFP Twin-port OSFP IHS/Finned Top to 4 x 200G OSFP RHS/Flat Top Active Copper Breakout DAC Cable
The 800G OSFP Twin-port OSFP IHS/Finned Top to 4 x 200G OSFP RHS/Flat Top Active Copper Breakout DAC Cable is a active breakout dac (acc) direct attach copper cable with OSFP (IHS/Finned Top) to 4x OSFP (RHS/Flat Top), supporting 850Gbps (8x 106.25Gbps) links over a length of 1-5m (3ft-16ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. It is a cost effective, low latency interconnect for InfiniBand NDR fabrics, GPU clusters and AI training networks, and complies with CMIS 5.0, IEEE 802.3ck, OSFP MSA Rev 5.0.
Product Highlights
- OSFP (IHS/Finned Top) to 4x OSFP (RHS/Flat Top)
- Data rate: 850Gbps (8x 106.25Gbps)
- Cable type: Active Breakout DAC (ACC)
- Length: 1-5m (3ft-16ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-4OFLACxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (IHS/Finned Top) to 4x OSFP (RHS/Flat Top) |
| Max. Data Rate | 850Gbps (8x 106.25Gbps) |
| Media | Copper |
| Cable Type | Active Breakout DAC (ACC) |
| Cable Length | 1-5m (3ft-16ft) |
| Wire AWG | 26-30AWG |
| Minimum Bend Radius | 23-32.5mm |
| Max. Power Consumption | 1.7W (800G End) 0.3W (200G Per End) |
| Jacket Material | PET |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation Format | 8x100G-PAM4 to Quad 2x100G-PAM4 |
| Application | 800G/200G Ethernet/InfiniBand |
| Protocols | CMIS 5.0, IEEE 802.3ck, OSFP MSA Rev 5.0 |
Applications
In InfiniBand NDR fabrics, GPU clusters and AI training networks, the 800G OSFP Twin-port OSFP IHS/Finned Top to 4 x 200G OSFP RHS/Flat Top Active Copper Breakout DAC Cable provides a factory terminated 850Gbps (8x 106.25Gbps) link between OSFP (IHS/Finned Top) to 4x OSFP (RHS/Flat Top) ports. This unit is supplied at 1-5m (3ft-16ft). By fanning one port out to 4x OSFP (RHS/Flat Top), it doubles or quadruples the number of endpoints served per switch port and keeps the cabling plant simple. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.
Standards and Compatibility
This product is designed and tested to comply with CMIS 5.0, IEEE 802.3ck, OSFP MSA Rev 5.0. It plugs into any standards-based OSFP (IHS/Finned Top) to 4x OSFP (RHS/Flat Top) port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
This model is supplied at 1-5m (3ft-16ft) under part number OSFP-800G-4OFLACxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26-30AWG. Samples for testing can be arranged before bulk orders.
Packing Details
Standard packing is an anti-static bag plus blister protection, with cartons sized to keep products from moving in transit. We apply our standard labels by default; neutral packing or customer-branded labels, part number stickers and serial barcodes are all available on request.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
How We Ship
Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.
Quality and Testing
Every unit we ship is tested in our own test bed on mainstream switch and transport platforms before packing. Our test center has been fully upgraded, which sets us apart from other third party product providers: 10G, 40G, 100G, 200G and 400G transceivers and direct attach cables are verified on the latest top brand equipment, including selected original switches that can hardly be found elsewhere.
