800G OSFP IHS/Finned Top to 4x 200G OSFP RHS/Flat Top Passive Breakout DAC Cable
For short reach 800Gbps links in 800G Ethernet data center and cloud network environments, the 800G OSFP IHS/Finned Top to 4x 200G OSFP RHS/Flat Top Passive Breakout DAC Cable offers a factory terminated passive twinax assembly with Single-port 800G OSFP (IHS/Finned Top) to 4× 200G OSFP (RHS/Flat Top) connectors and a length of Customized. As a passive cable it draws essentially no power and adds no latency to the link. The cable meets OSFP MSA, IEEE 802.3ck, CMIS v4.0.
Product Highlights
- Single-port 800G OSFP (IHS/Finned Top) to 4× 200G OSFP (RHS/Flat Top)
- Data rate: 800Gbps
- Cable type: Passive Twinax
- Length: Customized
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-4OFLPCxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | Single-port 800G OSFP (IHS/Finned Top) to 4× 200G OSFP (RHS/Flat Top) |
| Max Data Rate | 800Gbps |
| Media | Copper |
| Cable Type | Passive Twinax |
| Cable Length | Customized |
| Wire AWG | 28-30AWG |
| Minimum Bend Radius | 26-31mm |
| Max. Power Consumption | 0.1W (800G End) 0.1W (200G Per End) |
| Jacket Material | PVC |
| Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | OSFP MSA, IEEE 802.3ck, CMIS v4.0 |
| Modulation Format | 8x 100G PAM4 to Quad 2x 100G PAM4 |
Applications
In 800G Ethernet data center and cloud network environments, the 800G OSFP IHS/Finned Top to 4x 200G OSFP RHS/Flat Top Passive Breakout DAC Cable provides a factory terminated 800Gbps link between Single-port 800G OSFP (IHS/Finned Top) to 4× 200G OSFP (RHS/Flat Top) ports. Ordered in customized lengths, it matches the actual rack geometry without slack. Because the assembly is factory terminated and tested as a complete link, installation is plug and play on both ends. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment. The link runs 8x 100G PAM4 to Quad 2x 100G PAM4 modulation, which keeps it aligned with current 800G switch silicon.
Standards and Compatibility
Compliance: OSFP MSA, IEEE 802.3ck, CMIS v4.0. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
This cable is built to order in customized lengths. Our part number OSFP-800G-4OFLPCxxx identifies the configuration. When placing an order, tell us the length you need and any label or packaging requirements. Volume pricing is available for project quantities.
Tested Before Shipment
We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.
OEM and Custom Orders
We have manufactured fiber optic connectivity products since 1995 and run our own production lines in Shenzhen. Beyond the standard catalog we build to order: special cable lengths, custom connector combinations, vendor-specific compatibility coding and private labeling. Send us your requirement and our engineers will quote a practical solution.
Shipping and Lead Time
Standard products are held in stock and usually ship within one to three working days. We dispatch worldwide by DHL, UPS, FedEx, TNT or EMS, and for bulk orders we arrange air or sea freight. Shipments can also be sent collect on your own courier account or delivered to your freight forwarder.
