800G OSFP Twin-port OSFP IHS/Finned Top to 4 x 200G QSFP112 Passive Copper Breakout DAC Cable
The 800G OSFP Twin-port OSFP IHS/Finned Top to 4 x 200G QSFP112 Passive Copper Breakout DAC Cable provides an 800Gbps copper connection between OSFP (IHS/Finned Top) to 4x QSFP112 ports with a cable length of 0.5~2m (2~7ft). As a passive cable it draws essentially no power and adds no latency to the link. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for 800G Ethernet data center and cloud network environments.
Product Highlights
- OSFP (IHS/Finned Top) to 4x QSFP112
- Data rate: 800Gbps
- Cable type: Passive Breakout DAC
- Length: 0.5~2m (2~7ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-4QPCxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (IHS/Finned Top) to 4x QSFP112 |
| Max. Data Rate | 800Gbps |
| Media | Copper |
| Cable Type | Passive Breakout DAC |
| Cable Length | 0.5~2m (2~7ft) |
| Jacket Material | PVC |
| Minimum Bend Radius | 26~31mm |
| Wire AWG | 28~30AWG |
| Max. Power Consumption | 0.1W (OSFP End) 0.1W (QSFP112 Per End) |
| Modulation Format | OSFP-8x 100G-PAM4 QSFP112-2x 100G-PAM4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Application | 800G/200G Ethernet |
| Protocols | OSFP MSA, QSFP112 MSA, IEEE 802.3ck, CMIS v5.0 |
Applications
Designed for 800G Ethernet data center and cloud network environments, the 800G OSFP Twin-port OSFP IHS/Finned Top to 4 x 200G QSFP112 Passive Copper Breakout DAC Cable carries 800Gbps between OSFP (IHS/Finned Top) to 4x QSFP112 interfaces. This unit is supplied at 0.5~2m (2~7ft). By fanning one port out to 4x QSFP112, it doubles or quadruples the number of endpoints served per switch port and keeps the cabling plant simple. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.
Standards and Compatibility
Compliance: OSFP MSA, QSFP112 MSA, IEEE 802.3ck, CMIS v5.0. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
This model is supplied at 0.5~2m (2~7ft) under part number OSFP-800G-4QPCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 28~30AWG.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
Logistics
Our warehouse keeps fast-moving transceivers and cables ready for same-week dispatch. Courier, air freight and sea freight options are all available depending on your budget and schedule, and we consolidate multiple items into one shipment whenever it saves you cost.
Our Testing Process
Production samples and every outgoing batch pass through bit-error-rate measurement, temperature verification and plug-in compatibility checks on mainstream switches and routers. Because we are the manufacturer, any issue found in testing is fed back to the production line immediately instead of being passed on to customers.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.
