800G OSFP DR8 FL Optical Transceiver
Designed for InfiniBand NDR fabrics, GPU clusters and AI training networks, the 800G OSFP DR8 FL Optical Transceiver provides 850Gbps (8x 106.25Gbps) throughput in a Twin-port OSFP RHS/Flat Top form factor. It operates at 1310nm over SMF through a Dual MTP/MPO-12 APC connector and supports link lengths up to 500m. The module meets IEE802.3ck, IEEE 802.3cu, OSFP MSA and includes digital diagnostic monitoring for live status readout.
Product Highlights
- Twin-port OSFP RHS/Flat Top form factor, 850Gbps (8x 106.25Gbps) data rate
- Wavelength: 1310nm
- Connector: Dual MTP/MPO-12 APC
- Reach: up to 500m
- Fiber media: SMF
Specifications
| Part Number | OSFP-DR8-800G-FL |
|---|---|
| Manufacturer | HT |
| Form Factor | Twin-port OSFP RHS/Flat Top |
| Max Data Rate | 850Gbps (8x 106.25Gbps) |
| Wavelength | 1310nm |
| Max Cable Distance | 500m |
| Connector | Dual MTP/MPO-12 APC |
| Media | SMF |
| Transmitter Type | EML |
| Receiver Type | PIN |
| TX Power | -2.9~4.0dBm |
| Minimum Receiver Power | -5.9dBm |
| Power Budget | 3dB |
| Receiver Overload | 5dBm |
| Max Power Consumption | 17W |
| Extinction Ratio | >3.5dB |
| Modulation (Electrical) | 8x100G-PAM4 |
| Modulation (Optical) | Dual 4x100G-PAM4 |
| Packaging Technology | COB (Chip on Board) Packaging |
| Modulation Format | PAM4 |
| CDR (Clock and Data Recovery) | TX & RX Built-in DSP |
| Inbuilt FEC | No |
| Protocols | IEE802.3ck, IEEE 802.3cu, OSFP MSA |
Applications
The 800G OSFP DR8 FL Optical Transceiver is used in InfiniBand NDR fabrics, GPU clusters and AI training networks, where it provides an 850Gbps (8x 106.25Gbps) link over SMF up to 500m. The Dual MTP/MPO-12 APC interface and 1310nm optics match the standard cabling plant used in modern data halls, so existing trunks can be reused. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request. The link runs PAM4 modulation, which keeps it aligned with current 800G switch silicon.
Standards and Compatibility
Compliance: IEE802.3ck, IEEE 802.3cu, OSFP MSA. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
Our part number for this module is OSFP-DR8-800G-FL. When ordering, just let us know the quantity and whether you need the compatibility coding for a particular switch brand; labeling and packaging can also follow your channel requirements.
How We Ship
Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.
Tested Before Shipment
We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
