800G OSFP ACxxx Active DAC Cable Flat Top
The 800G OSFP ACxxx Active DAC Cable Flat Top is a active dac (acc) direct attach copper cable with 800G OSFP (RHS/Flat Top) to 800G OSFP (RHS/Flat Top), supporting 800Gbps (8x 106.25Gbps) links over a length of 1-5m (3ft-16ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. It is a cost effective, low latency interconnect for InfiniBand NDR fabrics, GPU clusters and AI training networks, and complies with CMIS 5.0, IEEE 802.3ck, OSFP Rev5.0.
Product Highlights
- 800G OSFP (RHS/Flat Top) to 800G OSFP (RHS/Flat Top)
- Data rate: 800Gbps (8x 106.25Gbps)
- Cable type: Active DAC (ACC)
- Length: 1-5m (3ft-16ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFPFL-800G-ACxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | 800G OSFP (RHS/Flat Top) to 800G OSFP (RHS/Flat Top) |
| Max. Data Rate | 800Gbps (8x 106.25Gbps) |
| Media | Copper |
| Cable Type | Active DAC (ACC) |
| Cable Length | 1-5m (3ft-16ft) |
| Wire AWG | 26-30AWG |
| Minimum Bend Radius | 48.5-59.5mm |
| Max. Power Consumption | 1.3W Per End |
| Jacket Material | PET |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation Format | 8x100G-PAM4 |
| Application | 800G Ethernet/InfiniBand |
| Protocols | CMIS 5.0, IEEE 802.3ck, OSFP Rev5.0 |
Applications
The 800G OSFP ACxxx Active DAC Cable Flat Top is an 800Gbps (8x 106.25Gbps) active copper cable for 800G OSFP (RHS/Flat Top) to 800G OSFP (RHS/Flat Top) connections in InfiniBand NDR fabrics, GPU clusters and AI training networks. This unit is supplied at 1-5m (3ft-16ft). The integrated construction removes separate optics from the link budget and reduces the number of failure points in the row. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.
Standards and Compatibility
Compliance: CMIS 5.0, IEEE 802.3ck, OSFP Rev5.0. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
This model is supplied at 1-5m (3ft-16ft) under part number OSFPFL-800G-ACxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26-30AWG. Volume pricing is available for project quantities.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
How We Ship
Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
