200G QSFP56 to 2 x 100G QSFP28 Active Optical Breakout AOC
The 200G QSFP56 to 2 x 100G QSFP28 Active Optical Breakout AOC connects QSFP56 to 2x QSFP28 ports at 200Gbps over Breakout AOC fiber at 850nm. Because the optics are built into the cable ends, installation is plug and play with no separate transceivers to manage, and airflow inside the rack stays unobstructed. It is well suited to 200G Ethernet, data center interconnect and 5G transport networks. Cable length: Customized.
Product Highlights
- QSFP56 to 2x QSFP28
- Data rate: 200Gbps
- Cable type: Breakout AOC
- Length: Customized
- Wavelength: 850nm
- DDM/DOM: Supported
Specifications
| Part Number | QSFP-200G-2Q4xNAOxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP56 to 2x QSFP28 |
| Max. Data Rate | 200Gbps |
| Cable Length | Customized |
| Cable Type | Breakout AOC |
| Wavelength | 850nm |
| Minimum Bend Radius | 30mm |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| Max. Power Consumption | 5.5W (QSFP56 End) 5.5W (QSFP28 Per End) |
| Jacket Material | OFNP |
| Modulation (Electrical) | QSFP56-4x 50G-PAM4 QSFP28-4x 25G-NRZ |
| Modulation (Optical) | QSFP56-4x 50G-PAM4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| DDM/DOM | Supported |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR |
| Inbuilt FEC | Yes |
| Protocols | IEEE 802.3cd-100GAUI-2, IEEE802.3bm-CAUI-4, IEEE 802.3cd, SFF-8661, SFP-8636, SFF-8636 |
Applications
The 200G QSFP56 to 2 x 100G QSFP28 Active Optical Breakout AOC is a 200Gbps active optical cable for QSFP56 to 2x QSFP28 connections in 200G Ethernet, data center interconnect and 5G transport networks. Ordered in customized lengths, it matches the actual rack geometry without slack. The breakout design lets one high speed port feed 2x QSFP28, which raises port utilization and simplifies cabling in dense rows. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request. The link runs QSFP56-4x 50G-PAM4 QSFP28-4x 25G-NRZ modulation, which keeps it aligned with current 200G switch silicon.
Standards and Compatibility
Compliance: IEEE 802.3cd-100GAUI-2, IEEE802.3bm-CAUI-4, IEEE 802.3cd, SFF-8661, SFP-8636, SFF-8636. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
This cable is built to order in customized lengths. Our part number QSFP-200G-2Q4xNAOxxx identifies the configuration. When placing an order, tell us the length you need and any label or packaging requirements. Samples for testing can be arranged before bulk orders.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.
Tested Before Shipment
We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.
