200G QSFP56 to 2 x QSFP56 Active Copper Breakout DAC Cable
The 200G QSFP56 to 2 x QSFP56 Active Copper Breakout DAC Cable is a active twinax direct attach copper cable with QSFP56 to 2× QSFP56, supporting 200Gbps links over a length of Customized. Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. It is a cost effective, low latency interconnect for 200G Ethernet data center and cloud network environments, and complies with IEEE 802.3cd, SFF-8665, QSFP MSA, SFF-8679, SFF-8636, InfiniBand HDR.
Product Highlights
- QSFP56 to 2× QSFP56
- Data rate: 200Gbps
- Cable type: Active Twinax
- Length: Customized
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Mellanox Compatible | QSFP-200G-2QACxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP56 to 2× QSFP56 |
| Max Data Rate | 200Gbps |
| Cable Length | Customized |
| Wire AWG | 30AWG for 3m 28AWG for 5m 26AWG for 7m |
| Minimum Bend Radius | 27.5mm for 3m 31.5mm for 5m 36.5mm for 7m |
| Max Power Consumption | 1.5W |
| Cable Type | Active Twinax |
| Jacket Material | PVC (OFNR) |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | IEEE 802.3cd, SFF-8665, QSFP MSA, SFF-8679, SFF-8636, InfiniBand HDR |
Applications
The 200G QSFP56 to 2 x QSFP56 Active Copper Breakout DAC Cable is a 200Gbps active copper cable for QSFP56 to 2× QSFP56 connections in 200G Ethernet data center and cloud network environments. Ordered in customized lengths, it matches the actual rack geometry without slack. The integrated construction removes separate optics from the link budget and reduces the number of failure points in the row. It is interoperable with Mellanox platforms and replaces the Mellanox part QSFP-200G-2QACxxx directly.
Standards and Compatibility
Compliance: IEEE 802.3cd, SFF-8665, QSFP MSA, SFF-8679, SFF-8636, InfiniBand HDR. For projects standardized on Mellanox hardware, this product replaces the QSFP-200G-2QACxxx directly, with identical fit and function. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
This cable is built to order in customized lengths. Our part number QSFP-200G-2QACXXX identifies the configuration. Wire gauge follows the length: 30AWG for 3m 28AWG for 5m 26AWG for 7m. When placing an order, tell us the length you need and any label or packaging requirements.
Worldwide Delivery
We ship to customers around the world every week. Express couriers handle most orders door to door in a few days; larger consignments go by air or sea to keep freight costs down. Tracking information is provided for every shipment, and we are flexible on shipping accounts and forwarders.
Reliability Control
From incoming component inspection to final burn-in, quality is controlled at each step of production. Finished units are verified on real networking equipment in our compatibility lab, and test records are kept per batch so that any field question can be traced back quickly.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
