100G QSFP28 BX10 4x 25G NRZ 1331nm-TX/1271nm-RX 10km Simplex LC/UPC Module, Cisco
Designed for 100G Ethernet, data center interconnect and 5G transport networks, the 100G QSFP28 BX10 4x 25G NRZ 1331nm-TX/1271nm-RX 10km Simplex LC/UPC Module, Cisco provides 106.25Gbps throughput in a QSFP28 form factor. It operates at 1331nm-TX/1271nm-RX over SMF through a Simplex LC/UPC connector and supports link lengths up to 10km. The module meets QSFP28 MSA, SFF-8636,IEEE 802.3bs , CAUI-4 and includes digital diagnostic monitoring for live status readout.
Product Highlights
- QSFP28 form factor, 106.25Gbps data rate
- Wavelength: 1331nm-TX/1271nm-RX
- Connector: Simplex LC/UPC
- Reach: up to 10km
- Fiber media: SMF
- DDM/DOM: Supported
Specifications
| Part Number | QSFP-BX10-100G |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP28 |
| Max. Data Rate | 106.25Gbps |
| Wavelength | 1331nm-TX/1271nm-RX |
| Max. Cable Distance | 10km |
| Connector | Simplex LC/UPC |
| Media | SMF |
| Transmitter Type | DFB |
| Receiver Type | PIN |
| TX Power | -1.9-4.8dBm |
| Minimum Receiver Power | -8.2dBm |
| Power Budget | 6.3dB |
| Receiver Overload | 4.8dBm |
| Max. Power Consumption | <4W |
| Extinction Ratio | >3.5dB |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation (Electrical) | 4x 25G-NRZ |
| Modulation (Optical) | 1x 100G-PAM4 |
| Bit Error Ratio (BER) | DSP |
| Packaging Technology | TO |
| Protocols | QSFP28 MSA, SFF-8636,IEEE 802.3bs , CAUI-4 |
Applications
Network architects choose the 100G QSFP28 BX10 4x 25G NRZ 1331nm-TX/1271nm-RX 10km Simplex LC/UPC Module, Cisco for 100G Ethernet, data center interconnect and 5G transport networks: it runs 106.25Gbps over SMF and reaches 10km. With its Simplex LC/UPC optical interface, the module works directly with the SMF infrastructure already installed in most facilities. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.
Standards and Compatibility
This product is designed and tested to comply with QSFP28 MSA, SFF-8636,IEEE 802.3bs , CAUI-4. It plugs into any standards-based QSFP28 port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
Order this product as QSFP-BX10-100G. Common models are stocked for fast dispatch. We can supply the module with neutral or customer-branded labels, and compatibility coding for a specific equipment vendor can be added at no extra process step.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
Logistics
Our warehouse keeps fast-moving transceivers and cables ready for same-week dispatch. Courier, air freight and sea freight options are all available depending on your budget and schedule, and we consolidate multiple items into one shipment whenever it saves you cost.
Quality and Testing
Every unit we ship is tested in our own test bed on mainstream switch and transport platforms before packing. Our test center has been fully upgraded, which sets us apart from other third party product providers: 10G, 40G, 100G, 200G and 400G transceivers and direct attach cables are verified on the latest top brand equipment, including selected original switches that can hardly be found elsewhere.
