SN UPC 4 Channels (8F) OS2 Fiber Adapter without Flange
For Pakistani procurement and engineering teams, the specification provides a practical basis for checking compatibility before production is requested. %s belongs to the very-small-form-factor generation of fiber connectivity. Compared with a duplex LC location, the VSFF interface carries the identical two fibers in roughly half this adapter panel space, which is what makes 200G, 400G and 800G breakout panels physically possible at high port counts. The adapter housing holds the ferrules aligned and latches the optical interfaces positively.
Product Highlights
- Color Coded for Rapid Identification of Single Mode Fiber Patterns
- ≤0.2dB (Typical) Low Insertion Loss
- Mates SN Standard, Junior and Compact Connectors
- Allows Up to 4 Times Higher Density Compared to Duplex LC Adapter
- 4 Independent Duplex Fiber Breakout at a Quad-style QSFP, QSFP-DD & OSFP Transceiver
Specifications
| Connector Type | Senko SN-SN |
|---|---|
| Body Style | 4-Port |
| Polish Type | UPC |
| Fiber Mode | OS2 9/125μm |
| Insertion Loss | ≤0.2dB |
| Durability | 500 times |
| Mounting Type | Reduced Flanged |
| Color | Blue |
| Flammability Rate | UL 94V-0 |
| RoHS Compliancy Status | Compliant |
| Operating Temperature | -40 to 85℃(-40 to 185℉) |
| Storage Temperature | -10 to 60℃(14 to 140℉) |
| Compliance Center | Test Center |
Phosphor bronze and zirconia sleeves compared
Two sleeve materials dominate the adapter housing market. Zirconia ceramic sleeves give the tightest alignment and are the suitable option for single-mode and high-behavior multimode work, where core geometry leaves no room for eccentricity. Phosphor bronze sleeves serve legacy multimode and metallic-ferrule connectors where the tolerance specification is looser and the cost matters more. Matching the sleeve to the application keeps the two behavior and budget under control.
Very small form factor connectivity
Since the duplex LC became the bottleneck of panel density, VSFF interfaces - CS, SN, MDC and MMC among them - exist. A CS or SN location carries two fibers in about half the LC duplex space, and an MMC carries sixteen in the space of a small module. The adapters that mount these interfaces hold the identical optical discipline as their larger ancestors: precision sleeves or guide-pin alignment, positive latching and keyed orientation. The reward is a panel that serves 400G and 800G breakout optics at full port count.
Planning a VSFF panel position
VSFF adapters belong wherever breakout optics meet the fiber plant: a 400G-DR4 transceiver breaks to four duplex positions, and at CS or SN density those four positions fit beside their neighbors without a larger chassis. Plan this adapter panel around the transceiver roadmap - the adapter housing footprint follows the optical interface, and the optical interface follows the optics. Keeping spare VSFF adapters in the site kit is cheap insurance, since the format is new sufficient that local stockists rarely carry it.
What adapter testing actually measures
An adapter contributes no signal of its own, and therefore its test is a mating test: reference connectors mate through the adapter housing, and the inserted loss is recorded. A zirconia-sleeve adapter ought to add no more than 0.2 dB, and the mating must repeat that figure across cycles. Durability testing runs the mating hundreds of times and re-measures - a sleeve that wears loose announces itself as creeping loss. These figures, not the housing color, are what separates an adapter that serves for years from one that becomes the mystery fault.
Selecting the right adapter for the panel
Five decisions define the adapter housing order: the optical interface pairing must be aligned with the two sides of the mating, the mounting style must fit this adapter panel cutout, the polish color code must be aligned with the plant, the sleeve material must suit the behavior grade, and the count must cover the load-out plus spares. Getting all five right at order time is what turns a bag of couplers into a dependable panel. Where the pairing crosses connector families, the hybrid range covers the common conversions.
Test Standards and Quality Control
Each adapter is inspected before packing: the sleeve bore is checked for alignment and surface finish, the housing latches are cycled for positive engagement, and sample matings from every production lot are measured for insertion loss. Accessories are checked for fit against the adapters they serve.
Ordering Details and Factory Support
Refer to this adapter by connector pairing, mounting style, polish grade and pack number of units when specifying a quotation. For configurations outside the listed options - mixed packs, panel hardware kits or project packing - send the specification with the request and the factory will make certain of the manufacturable specification. For Pakistan, a clear port or maintenance schedule helps us confirm the correct factory-built configuration before supply.
