Customized Duplex Fiber Patch Cable, LC/SC/FC/ST/LSH/MU/MTRJ, OS2
For Pakistani procurement and engineering teams, the specification provides a practical basis for checking compatibility before production is requested. This custom-built fiber patch cable is built to the precise setup the project specifies: connector styles, polish, fiber mode, jacket and length are all specified at order time and the terminated assembly is factory terminated and optically tested before dispatch.
Product Highlights
- Precision Zirconia Ferrule Connectors Ensure Low Loss
- Duplex Zipcord Construction Reduces Risk of Damage from Crimping
- Available in LC, SC, FC, ST, LSH, MU, and MTRJ Connectors
- Available in G.657.A1 and G.657.A2 Fiber Grades
- Available in 1.2mm, 1.6mm, 1.8mm, 2.0mm, and 3.0mm Cable Diameters
Specifications
| Fiber Count | 2 Fibers |
|---|---|
| Fiber Grade | G.657.A1/G.657.A2 |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Flame Rating | Riser (OFNR)/LSZH/Plenum (OFNP) |
| Cable Outside Diameter (OD) | 1.2/1.6/1.8/2.0/3.0mm |
| Polarity | A (Tx) to A (Rx)/A (Tx) to B (Rx) |
| Cable Type | Tight-Buffered |
| Min. Bend Radius (Optical Fiber) | 10/7.5mm (G.657.A1/G.657.A2) |
| Min. Bend Radius (Fiber Cable) | 10/5D (Dynamic/Static) |
| Connector Durability | 1000 times |
| Tensile Strength (Long/Short Term) | 40/80N (1.2mm), 60/120N (1.6mm), 90/150N (1.8/2.0mm), 120/225N (3.0mm) |
| Insertion Loss | ≤0.3dB |
| Return Loss | UPC≥50dB, APC≥60dB (LC/SC/FC/ST/MU/MTRJ) |
| Attenuation at 1310nm | ≤0.4dB/km |
| Attenuation at 1550nm | ≤0.3dB/km |
| Operating Temperature | Plenum (OFNP): -10 to 60°C (14 to 140°F) |
| Storage Temperature | Plenum (OFNP): -10 to 70°C (14 to 158°F) |
Built to the order
The custom-built program covers the combinations that stock lists cannot: mixed connector families, non-standard jackets, unusual lengths, identification and packing to the project specification. The terminated assembly is terminated and tested exactly like a stock product, with the setup confirmed before factory assembly.
Connector and polish choices in the single-mode plant
The OS2 interface on this jumper follows the polish discipline of the network it serves. Because mixing polishes on a mated pair destroys the return loss and can damage the ferrules, the patch side must be aligned with this adapter panel side exactly. When the documentation is unclear, the boot color and the optical interface housing tell the truth: green for APC, blue or beige for UPC.
Bend tolerance in real cabinets
Patch fields are rarely kind to fiber. Patch cords path through tight managers, sharp tray corners and crowded vertical channels. The bend-insensitive glass in the product assembly tolerates a 10mm fiber bend radius, and therefore a hurried routing decision during a night servicing window does not by itself turn into a measurable penalty on the connection.
Length Options
Catalogue lengths cover the common patching routes: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), with custom-built length offered beyond the list. Specifying the measured path length keeps the slack out of the manager and the strain off the optical interfaces.
Quality Control and Testing
Every manufactured assembly is terminated with precision zirconia ferrule connectors and optically tested before packing: insertion loss and return loss are verified on every cable, and end-face geometry is inspected for consistent physical contact. The installed cable ships with dust caps on the two connectors and the test result offered on specify.
Ordering and Factory Support
Refer to this setup by connector pair, fiber mode and length when specifying a quotation. For configurations outside the listed options, mixed connector families, jackets, identification or project packing, send the specification with the request and the factory will make certain of the build before factory assembly. For Pakistan, a clear port or maintenance schedule helps us confirm the correct factory-built configuration before supply.
