SC UPC Simplex Armored Fiber Patch Cable, OS2, Riser (OFCR)
For Pakistani procurement and engineering teams, the specification provides a practical basis for checking compatibility before production is requested. This simplex armored patch cable runs one OS2 9/125µm single-mode fiber between two SC UPC connectors, wrapped in a helical stainless steel tube under the blue 3.0mm riser-rated (OFCR) jacket. It suits the long tail of hardware that still speaks SC UPC: media converters, legacy ODFs, industrial switches and test sets that now sit at the exposed edge of the network.
Product Highlights
- Insertion loss ≤0.3dB, return loss ≥50dB
- Stock lengths 1m to 30m; custom lengths and jackets on request
- SC UPC to SC UPC simplex, OS2 9/125µm single mode
- Helical stainless steel armor against crush, impact and rodents
- G.657.A1 bend-insensitive fiber, 10/5D bend radius
- Riser (OFCR) flame rating for vertical building pathways
Specifications
| Connector Type | SC to SC |
|---|---|
| Polish Type | UPC to UPC |
| Fiber Mode | OS2 9/125µm |
| Wavelength | 1310/1550nm |
| Fiber Count | Simplex |
| Fiber Grade | G.657.A1 (Compatible with G.652.D) |
| Min. Bend Radius (Fiber Cable) | 10/5D (Dynamic/Static) |
| Cable Outside Diameter (OD) | 3.0mm |
| Flame Rating | Riser (OFCR) |
| Construction Type | Single Armored, Stainless Steel Tube |
| Tensile Strength | 120/225N (Long/Short Term) |
| Insertion Loss | ≤0.3dB |
| Return Loss | ≥50dB |
| Operating Temperature | -20 to 70°C (-4 to 158°F) |
| Storage Temperature | -40 to 70°C (-40 to 158°F) |
Simplex SC for BiDi optics and single-fiber links
Bidirectional transceivers put the two directions on one strand, and a simplex SC cord is the natural patching format for them. The identical build serves WDM monitor ports, optical taps and any connection where only one fiber is lit. Patching with a single-fiber cord keeps the unused side of the frame free and makes the strand easy to trace months later.
Where SC UPC remains the standard
Media converters, older carrier CPE, industrial Ethernet switches and much current ODF hardware still present SC UPC ports. The push-pull SC body is tolerant of frequent handling and easy to clean and examine, which keeps it in service long after LC took over the transceiver side. This cord lets that plant stay exactly as documented while gaining armored protection.
Armor under the floor and behind the wall
Simplex tails frequently disappear into places nobody inspects again: beneath raised floors, behind wall boxes, along baseboards in retrofit offices. Those are precisely the routes where unarmored patch cords get crushed or chewed. The helical steel tube inside this cord carries the mechanical rating, and therefore the pathway needs no conduit and the connection survives the life of the building.
Media converters and industrial links
A large share of simplex SC UPC demand comes from media converters and industrial Ethernet gear linking control rooms to field cabinets. Because these links run for years in cabinets that get opened monthly, the cord is handled far more than a data-center jumper. The armored build and the 1000-cycle ferrule rating are aimed at exactly that service pattern, and the stock lengths cover the usual cabinet-to-frame distances.
Standard and custom length options
Catalogue lengths are stocked for fast delivery: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft) and 30m (98ft), covering the common rack-to-rack, access and frame connections this cord is built for. Special lengths beyond this range are manufactured to order. Because simplex tails are frequently dressed into tight enclosures, ordering the measured length avoids the coil of slack that otherwise ends up trapped behind this adapter panel. Specifying the precise path length avoids the two the slack storage problem of an overlong cord and the strain risk of one that is too short.
Test standards and quality control
Each cord is terminated with precision zirconia ferrule SC connectors and verified for insertion loss and return loss before packing; the 0.3dB and 50dB figures are tested specifications on every unit. End-face geometry is inspected for stable physical contact, and the ferrules are rated for up to one thousand mating cycles.
Ordering Details and Factory Support
Refer to the SC UPC simplex armored series when specifying a quotation, stating the path length and jacket rating. Other connector mixes and polish types, including hybrid builds, are handled through the custom-built simplex armored program once the factory confirms the specification. For Pakistan, a clear port or maintenance schedule helps us confirm the correct factory-built configuration before supply.
