800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Passive Copper Breakout DAC Cable
The 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Passive Copper Breakout DAC Cable provides an 800Gbps copper connection between OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) ports with a cable length of 0.5~3m (2~10ft). As a passive cable it draws essentially no power and adds no latency to the link. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for 800G Ethernet data center and cloud network environments.
Product Highlights
- OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top)
- Data rate: 800Gbps
- Cable type: Passive Breakout DAC
- Length: 0.5~3m (2~10ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-2OFLPCxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) |
| Max. Data Rate | 800Gbps |
| Media | Copper |
| Cable Type | Passive Breakout DAC |
| Cable Length | 0.5~3m (2~10ft) |
| Jacket Material | PET |
| Minimum Bend Radius | 58~72mm |
| Wire AWG | 26~30AWG |
| Max. Power Consumption | 0.1W (800G End) 0.1W (400G Per End) |
| Modulation Format | 8x 100G-PAM4 to Dual 4x 100G-PAM4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Application | 800G/400G Ethernet |
| Protocols | OSFP MSA Rev5.0, IEEE 802.3ck, CMIS 4.0 |
Applications
The 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Passive Copper Breakout DAC Cable connects OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) ports at 800Gbps in 800G Ethernet data center and cloud network environments. This unit is supplied at 0.5~3m (2~10ft). By fanning one port out to 2x OSFP (RHS/Flat Top), it doubles or quadruples the number of endpoints served per switch port and keeps the cabling plant simple. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.
Standards and Compatibility
This product is designed and tested to comply with OSFP MSA Rev5.0, IEEE 802.3ck, CMIS 4.0. It plugs into any standards-based OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
This model is supplied at 0.5~3m (2~10ft) under part number OSFP-800G-2OFLPCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26~30AWG. Volume pricing is available for project quantities.
How We Ship
Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.
Our Testing Process
Production samples and every outgoing batch pass through bit-error-rate measurement, temperature verification and plug-in compatibility checks on mainstream switches and routers. Because we are the manufacturer, any issue found in testing is fed back to the production line immediately instead of being passed on to customers.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
