800G OSFP IHS/Finned Top to 2 x 400G OSFP IHS/Finned Top Passive Copper Breakout DAC Cable
The 800G OSFP IHS/Finned Top to 2 x 400G OSFP IHS/Finned Top Passive Copper Breakout DAC Cable is a passive breakout dac direct attach copper cable with OSFP (IHS/Finned Top) to 4x OSFP (IHS/Finned Top), supporting 800Gbps links over a length of 0.5-2m (2ft-7ft). As a passive cable it draws essentially no power and adds no latency to the link. It is a cost effective, low latency interconnect for 800G Ethernet data center and cloud network environments, and complies with OSFP MSA, CMIS Rev4.0, IEEE 802.3ck.
Product Highlights
- OSFP (IHS/Finned Top) to 4x OSFP (IHS/Finned Top)
- Data rate: 800Gbps
- Cable type: Passive Breakout DAC
- Length: 0.5-2m (2ft-7ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-4OPCxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (IHS/Finned Top) to 4x OSFP (IHS/Finned Top) |
| Max. Data Rate | 800Gbps |
| Media | Copper |
| Cable Type | Passive Breakout DAC |
| Cable Length | 0.5-2m (2ft-7ft) |
| Wire AWG | 28-30AWG |
| Minimum Bend Radius | 26-31mm |
| Max. Power Consumption | 0.1W (800G End), 0.1W (200G Per End) |
| Jacket Material | PVC (OFNR) |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation Format | 8x100G-PAM4 to Quad 2x100G-PAM4 |
| Application | 800G/200G Ethernet |
| Protocols | OSFP MSA, CMIS Rev4.0, IEEE 802.3ck |
Applications
The 800G OSFP IHS/Finned Top to 2 x 400G OSFP IHS/Finned Top Passive Copper Breakout DAC Cable is an 800Gbps direct attach copper cable for OSFP (IHS/Finned Top) to 4x OSFP (IHS/Finned Top) connections in 800G Ethernet data center and cloud network environments. This unit is supplied at 0.5-2m (2ft-7ft). One port becomes 4x OSFP (IHS/Finned Top), a common pattern for connecting newer aggregation ports to an installed base of lower speed equipment. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment. The link runs 8x100G-PAM4 to Quad 2x100G-PAM4 modulation, which keeps it aligned with current 800G switch silicon.
Standards and Compatibility
Compliance: OSFP MSA, CMIS Rev4.0, IEEE 802.3ck. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
This model is supplied at 0.5-2m (2ft-7ft) under part number OSFP-800G-4OPCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 28-30AWG. Volume pricing is available for project quantities.
Shipping and Lead Time
Standard products are held in stock and usually ship within one to three working days. We dispatch worldwide by DHL, UPS, FedEx, TNT or EMS, and for bulk orders we arrange air or sea freight. Shipments can also be sent collect on your own courier account or delivered to your freight forwarder.
Tested Before Shipment
We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.
Packaging Options
Default packaging is simple and protective: sealed bag, blister tray, export carton. For OEM customers we also offer white-label packing, custom printed boxes and per-unit labeling with your own part numbers, so the goods can go straight into your sales channel.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
