800G OSFP IHS/Finned Top to 2x 400G OSFP IHS/Finned Top Passive Breakout DAC Cable
The 800G OSFP IHS/Finned Top to 2x 400G OSFP IHS/Finned Top Passive Breakout DAC Cable is a passive twinax direct attach copper cable with OSFP (IHS/Finned Top) to 2× OSFP (IHS/Finned Top), supporting 800Gbps links over a length of customized length. As a passive cable it draws essentially no power and adds no latency to the link. It is a cost effective, low latency interconnect for 800G Ethernet data center and cloud network environments, and complies with OSFP MSA, IEEE 802.3ck, CMIS v4.0.
Product Highlights
- OSFP (IHS/Finned Top) to 2× OSFP (IHS/Finned Top)
- Data rate: 800Gbps
- Cable type: Passive Twinax
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Manufacturer | HT |
|---|---|
| Form Factor | OSFP (IHS/Finned Top) to 2× OSFP (IHS/Finned Top) |
| Max Data Rate | 800Gbps |
| Media | Copper |
| Max. Power Consumption | 0.1W (800G End) 0.1W (400G Per End) |
| Cable Type | Passive Twinax |
| Jacket Material | PVC |
| Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | OSFP MSA, IEEE 802.3ck, CMIS v4.0 |
| Application | 800G Ethernet |
| Modulation Format | 8x 100G PAM4 to Dual 4x 100G PAM4 |
Applications
Designed for 800G Ethernet data center and cloud network environments, the 800G OSFP IHS/Finned Top to 2x 400G OSFP IHS/Finned Top Passive Breakout DAC Cable carries 800Gbps between OSFP (IHS/Finned Top) to 2× OSFP (IHS/Finned Top) interfaces. The integrated construction removes separate optics from the link budget and reduces the number of failure points in the row. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.
Standards and Compatibility
Standards compliance covers OSFP MSA, IEEE 802.3ck, CMIS v4.0. The unit works in any equipment with a standard OSFP (IHS/Finned Top) to 2× OSFP (IHS/Finned Top) interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
This model is supplied at standard length under part number OSFP-800G-2OPCXXX. Other lengths of the same assembly can be produced on request.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
