800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Active Copper Breakout DAC Cable
For short reach 800Gbps links in 800G Ethernet data center and cloud network environments, the 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Active Copper Breakout DAC Cable offers a factory terminated active breakout dac (acc) assembly with 800G OSFP (IHS/Finned Top) to 2x 400G OSFP (RHS/Flat Top) connectors and a length of 1~5m (3ft-16ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. The cable meets OSFP MSA, CMIS 5.0, IEEE 802.3 ck.
Product Highlights
- 800G OSFP (IHS/Finned Top) to 2x 400G OSFP (RHS/Flat Top)
- Data rate: 800Gbps
- Cable type: Active Breakout DAC (ACC)
- Length: 1~5m (3ft-16ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-2OFLACxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | 800G OSFP (IHS/Finned Top) to 2x 400G OSFP (RHS/Flat Top) |
| Max. Data Rate | 800Gbps |
| Media | Copper |
| Cable Type | Active Breakout DAC (ACC) |
| Cable Length | 1~5m (3ft-16ft) |
| Jacket Material | PET |
| Minimum Bend Radius | 32.5~40mm |
| Wire AWG | 26~30AWG |
| Max. Power Consumption | 1.5W (800G End)/0.6W (400G Per End) |
| Modulation Format | 8x 100G-PAM4 to Dual 4x 100G-PMA4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Application | 800G/400G Ethernet |
| Protocols | OSFP MSA, CMIS 5.0, IEEE 802.3 ck |
Applications
In 800G Ethernet data center and cloud network environments, the 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Active Copper Breakout DAC Cable provides a factory terminated 800Gbps link between 800G OSFP (IHS/Finned Top) to 2x 400G OSFP (RHS/Flat Top) ports. This unit is supplied at 1~5m (3ft-16ft). By fanning one port out to 2x 400G OSFP (RHS/Flat Top), it doubles or quadruples the number of endpoints served per switch port and keeps the cabling plant simple. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request. The link runs 8x 100G-PAM4 to Dual 4x 100G-PMA4 modulation, which keeps it aligned with current 800G switch silicon.
Standards and Compatibility
Compliance: OSFP MSA, CMIS 5.0, IEEE 802.3 ck. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
This model is supplied at 1~5m (3ft-16ft) under part number OSFP-800G-2OFLACxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26~30AWG.
How We Ship
Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.
Tested Before Shipment
We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
